(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Text in Illustration
(d) Inspect if the exhaust valve is stuck:
(1) Connect a positive (+) lead from the battery to terminal 2 (B) and a negative (-) lead to terminal 1 (L).
(2) Check the operating sound of the exhaust valve.
OK:
It makes an operating sound (click).
NG -- REPLACE HEIGHT CONTROL COMPRESSOR ASSEMBLY See: Steering and Suspension/Suspension/Suspension
Control ( Automatic - Electronic )/Compressor/Pump/Service and Repair/Removal
OK -- Continue to next step.
7. INSPECT PNEUMATIC W/TUBE TANK ASSEMBLY (LOW PRESSURE TANK VALVE)
(a) Turn the engine switch off.
(b) Disconnect the low pressure tank valve connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Text in Illustration
(d) Inspect if the low pressure tank valve is stuck :
(1) Connect a positive (+) lead from the battery to terminal 2 (B) and a negative (-) lead to terminal 1 (L).
(2) Check the operating sound of the low pressure tank valve.
No comments:
Post a Comment