2016 GMC Truck Acadia AWD V6-3.6L Technical Service Bulletin # 10-08-52-003 Date: 100721

2016 GMC Truck Acadia AWD V6-3.6L Technical Service Bulletin # 10-08-52-003 Date: 100721

Keyless Entry - Transmitter Button Inop/Won't Program

INFORMATION

Bulletin No.: 10-08-52-003

Date: July 21, 2010

Subject: Remote Keyless Entry Transmitter (RKE) Button Inoperative or Will Not Reprogram to Vehicle

Models:

2016 GMC Truck Acadia AWD V6-3.6L Page 284

2006-2008 Buick Allure/LaCrosse

2006-2010 Buick Lucerne

2008-2010 Buick Enclave

2006-2007 Cadillac SRX

2006-2009 Cadillac DTS

2008-2009 Cadillac CTS (Non-EZ Key), Escalade, Escalade ESV, Escalade EXT

2006-2010 Chevrolet Impala

2007-2009 Chevrolet Equinox

2007-2010 Chevrolet Avalanche, Silverado, Tahoe, Suburban

2008-2010 Chevrolet Express

2009-2010 Chevrolet Captiva

2007-2010 GMC Acadia, Sierra, Yukon, Yukon XL (Including Denali Models)

2008-2010 GMC Savana

2007-2009 Pontiac Torrent

2007-2010 Saturn OUTLOOK

2008-2010 Saturn VUE

2008-2010 HUMMER H2, H2 SUT

with Remote Keyless Entry

Attention:

This bulletin should be distributed and reviewed by the Service Manager and Service Advisors. A copy of this bulletin may be given to your

customer to assist in explaining the remote keyless entry (RKE) transmitter operation.

This bulletin provides information regarding any remote keyless entry/transmitter (key fob) that may be inoperative intermittently or in which a

particular button(s) does not work.

To prevent transmitter battery drain, the RKE transmitter will disable any button or buttons that are depressed longer than 30 seconds. The disabled

button or buttons will remain disabled until another button that has not been disabled is pressed.

If a button or buttons on a transmitter are not functioning, or if a transmitter cannot be programmed to a vehicle, press and release each and every

button on the fob one at a time until you find one that works then retest the other buttons. If all buttons are now working, the button(s) were disabled

and the transmitter is working as designed.

If the transmitter still fails to function properly, use the J-43241 tester and follow normal diagnostics as shown in SI.